Royal Enfield 148034/E Sprocket – Rear Drive | Genuine OEM | Interceptor 650 & Continental GT 650

The Royal Enfield 148034/E Sprocket – Rear Drive is a genuine OEM rear chain sprocket used on the 650 Twin platform, including the Royal Enfield Interceptor 650 and Continental GT 650.

The rear drive sprocket transfers power from the motorcycle’s chain to the rear wheel, forming an important part of the final-drive system. Proper sprocket condition is essential for smooth power transmission, correct chain engagement and consistent drivetrain operation.

Royal Enfield parts catalogues identify 148034/E as “SPROCKET-REAR DRIVE” and list it for the Continental GT 650 and Interceptor 650 rear-wheel application.

The part 148034/E supersedes 148034/D, making it the current reference when replacing the older 148034/D sprocket.

This OEM rear sprocket is an ideal replacement when the original sprocket has worn teeth, hooked teeth, uneven wear or when replacing the complete chain-and-sprocket set.

Key Features

• Genuine Royal Enfield OEM Spare Part
• Part Number: 148034/E
• Catalogue Description: SPROCKET-REAR DRIVE
• Rear Wheel / Final Drive Sprocket
• Designed for Royal Enfield 650 Twin motorcycles
• Suitable for Interceptor 650 & Continental GT 650
• Current part number replacing 148034/D
• OEM mounting and seating design
• Designed for correct chain engagement
• Helps maintain proper final-drive operation
• Catalogue sources identify the sprocket as 15T.

Compatibility

Royal Enfield 650 Twin

• Royal Enfield Interceptor 650
• Royal Enfield Continental GT 650

The Royal Enfield parts catalogue specifically lists 148034/E for the rear wheel application of both models.

Important: This is a rear drive sprocket, not the front/countershaft sprocket. Confirm the part number before ordering.

Application

Used as the rear chain drive sprocket on the rear wheel assembly.

It works with the motorcycle’s final-drive chain to transfer engine power to the rear wheel.

When to Replace the Rear Sprocket

Replacement may be required when you notice:

• Hooked or pointed sprocket teeth
• Excessive tooth wear
• Chain skipping
• Uneven chain wear
• Jerky power delivery
• Excessive drivetrain noise
• Sprocket damage
• Chain and sprocket replacement due to normal wear

For best results, inspect the front sprocket and drive chain at the same time. If all components are significantly worn, replacing the complete chain-and-sprocket set is generally preferable.

Package Contents

• 1 × Royal Enfield 148034/E Rear Drive Sprocket

Bolts, nuts, washers, chain and sprocket carrier are not included unless specifically mentioned in the product package.

Installation

Professional installation is recommended.

1. Secure the motorcycle safely.
2. Remove the rear wheel/sprocket carrier as per the applicable service procedure.
3. Remove the old rear sprocket.
4. Inspect the sprocket carrier, mounting bolts and related hardware.
5. Install the 148034/E rear drive sprocket in the correct orientation.
6. Tighten the sprocket fasteners according to the manufacturer’s specified torque.
7. Reinstall the rear wheel and chain.
8. Check chain alignment and chain slack.
9. Rotate the rear wheel and confirm smooth chain engagement.

Important: Correct torque and rear-wheel alignment are essential for safe operation.

Product Specifications

Genuine OEM Information

Part Number: 148034/E
Description: SPROCKET-REAR DRIVE
Application: Royal Enfield Interceptor 650 & Continental GT 650
Supersession: 148034/E replaces 148034/D.